klen-rosha.ru


Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
- Brake system
    Brakes
    Brake highway/hose the brake cylinder
    Forward brakes
   - Lay and back brake
       The general description
      - Diagnostics
         Check and adjustment
         Vehicle service
         Cable of a lay brake
         Brake drum
         Brake колодка
         The brake cylinder
         Back plate of a brake
    Antiblocking brake system (ABS)
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





Vehicle service

The lever of a lay brake

Removal

 PERFORMANCE ORDER

  1. Disconnect negative (-) a cable from the battery.
  2. Stop wheels of a vehicle and release the lever of a lay brake.
  3. Remove a back central console box.
  4. Disconnect a wire conclusion of the switch of a lay brake at linking муфты.
  5. Remove a lock nut of a cable of a lay brake (1).
1 — a lock nut of a cable of a lay brake
2 — the lever of a lay brake
3 — a brake cable
  1. Remove bolts of the lever of a lay brake (4) and then remove assemblage of the lever of a lay brake (5) from the balance weight (2) and checks (3).
  1. Remove the balance weight from a cable of a lay brake (1).

Do not assort the switch of the lever of a lay brake. He should be removed and established as the uniform block of the switch.

Installation

Installation procedure is the procedure of removal which are carried out upside-down.

 PERFORMANCE ORDER

  1. Check up an angle of slope of the balance weight (2). A balance weight Angle of slope: "a" — within 15 degrees. An inhaling twisting moment: a bolt of the lever of a lay brake (a) — 26 Н•м (2.6 kg th, 19.0 pounds-foots).
1 — a cable of a lay brake
2 — a balance weight angle of slope
3 — the check
4 — a bolt of the lever of a lay brake
5 — assemblage of the lever of a lay brake
  1. After all parts are established, the lever of a lay brake is necessary for adjusting.
  2. Address to Section Check and adjustment of a lay brake in the Head Brake system.
  3. Whether check up there is no jamming of a brake drum and whether the brake system correctly works.