The table of codes of diagnostics of malfunctions (DTC) (the Code of automatic transmission)
|
Number of a code of malfunction (DTC)
|
The found out malfunction
|
|
With the scanning tool
|
Without the scanning tool
|
|
—
|
12
|
—
|
|
Р0705
|
72
|
Malfunction of the scheme of the gauge of position of transfer
|
|
Р0715
|
76
|
Malfunction of the scheme of the gauge of speed of a leading shaft/turbine
|
|
Р0720
|
75
|
Malfunction of the scheme of the gauge of speed on an exit
|
|
*1
Р0741
|
It is not applied
|
Work or jamming of solenoid TSS (blocking)
|
|
Р0743
|
65
66
|
Electric solenoid TSS (blocking)
|
|
*1
Р0751
|
It is not applied
|
Work or jamming of the solenoid of switching (№1)
|
|
Р0753
|
61
62
|
The electric solenoid of switching (№1)
|
|
*1
Р0756
|
Not a comment
|
Work or jamming of the solenoid of switching-in (№2)
|
|
Р0758
|
63
64
|
The electric solenoid of switching-in (№2)
|
|
*1
Р1875
|
It is not applied
|
Malfunction of the scheme of the bottom switch of a full drive
|
|
Defined condition
|
The malfunction indicator
|
|
The car without a socket for the monitor
|
The car with a socket for the monitor
|
|
Problems are not present
|
—
|
—
|
|
Simultaneously on an input many signals or not a signal move at movement for the speed of 60 km/h or more.
|
2 motion cycles
|
It is not applied
|
|
Speed of rotation of a leading shaft below the specified value at movement of the car with transfer to position “D” and the specified speed of the engine or above.
|
2 motion cycles
|
1 motion cycle
|
|
The signal of the gauge of speed on an exit does not arrive, though the signal of speed of the car arrives.
|
2 motion cycles
|
1 motion cycle
|
|
Real work ТСС will not be co-ordinated with function management INCL. / off, going from the electronic control block to ТСС.
|
2 motion cycles
|
It is not applied
|
|
On the monitor the signal OFF when the solenoid of management ТСС is included is defined, or on the monitor the signal is defined INCL. when it is switched off.
|
1 motion cycle
|
1 motion cycle
|
|
The management of a gear change going from the electronic block of management (РСМ) to an automatic transmission (А/Т), will not be co-ordinated with real position of transfer of an automatic transmission.
|
2 motion cycles
|
It is not applied
|
|
On the monitor the signal OFF when the solenoid of switching (№1) is included is defined, or on the monitor the signal is defined INCL. when it is switched off.
|
1 motion cycle
|
1 motion cycle
|
|
The management of a gear change going from the electronic block of management (РСМ) to an automatic transmission (А/Т), will not be co-ordinated with real position of transfer of an automatic transmission.
|
2 motion cycles
|
It is not applied
|
|
On the monitor the signal OFF when the solenoid of switching-in (№2) is included is defined, or on the monitor the signal is defined INCL. when it is switched off.
|
1 motion cycle
|
1 motion cycle
|
|
Difference between the speed of the car defined by the gauge of speed of the car (VSS), and the speed of the car defined by the gauge of speed on an exit and compensated by the bottom switch of a full drive, more specified in the specification.
|
2 motion cycles
|
It is not applied
|
*1: It is applied only on the car without a socket to the monitor.