Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
- Steering
    Suspension bracket, wheels and tyres
   - Adjustment of corners of installation of wheels of a forward suspension bracket
      - The general information
         Convergence of forward wheels
         Disorder of forward wheels
         Кастер
         Preparation for adjustment of corners of installation of wheels of a forward suspension bracket
         Adjustment of a corner of a convergence of forward wheels
         Adjustment of a corner of disorder and кастера
         Angle of rotation of wheels
         Lateral sliding of wheels (standard)
    System of the hydraulic booster of a wheel
    Steering wheel and steering column
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





Adjustment of a corner of a convergence of forward wheels

 PERFORMANCE ORDER

  1. Convergence it is regulated by change of length of steering draught. Ослабьте counternuts on the left and right steering draughts and, then, scroll steering draughts on equal quantity of turns from the left and right parties to level value of a convergence to a preset value.
  1. In this adjustment the left and right steering draught should become identical length.

Before torsion of steering draughts, put greasing between draught and a protective cover in order that protective covers of hinges were not overwound.

  1. After adjustment, tighten a counternut (1) with the corresponding moment. The inhaling moment: steering draught and a counternut (): 65 Н•м (6,5 kg th).

Check up that protective covers of hinges were not overwound.