Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
- Steering
    Suspension bracket, wheels and tyres
    Adjustment of corners of installation of wheels of a forward suspension bracket
    System of the hydraulic booster of a wheel
   - Steering wheel and steering column
       Steering wheel and steering column the safety not equipped with a pillow
      - Steering wheel and steering column with a safety pillow
         The general description
          Diagnostics
         - Service out of a workshop
             Safety measures at service
            The module (having inflated) pillows of the driver
            - Steering wheel
               The centering contact coil
            The contact coil and подрулевые switches
            Steering column (at not a cabriolet)
            The top shaft of a steering (at not a cabriolet)
            Steering column (at a cabriolet)
            The steering lock (the ignition switch)
            The bottom shaft of a steering
            Check of a steering column and the top shaft of a steering on presence of damages at failure (at not a cabriolet)
            Check of a steering column on damages at failure (at a cabriolet)
            The lever of an adjustable unblocking of a steering column
         Specifications of the moment of an inhaling
         The special tool
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment






The centering contact coil

 PERFORMANCE ORDER

    Be convinced that forward wheels of the car are directed directly forward. Be convinced that the ignition switch is in position “LOCK”. Slowly with easy effort turn the contact coil counter-clockwise against the stop.

The contact coil can turn about a maximum on 5 turns that is when it is in the central position, it can turn on two and a half a turn on and counter-clockwise.

    From this position when the coil has stopped and does not move further, turn it back clockwise approximately on two and a half a turn and combine the central label with a levelling label (1).
    Turn slowly while the coil will not stop.
    2 — Not a cabriolet
    3 — the Cabriolet
    Turn the coil back approximately on 2.5 turns.

Installation

 PERFORMANCE ORDER

    Be convinced that forward wheels of the car are directed directly forward, and the contact coil is in the central position.

These two conditions are necessary for steering wheel installation. If a steering wheel to establish, without having met these conditions, the contact coil will break at steering wheel turn.

    Establish a steering wheel on a steering shaft, having got two teeth of the contact coil to two grooves on a back part of a steering wheel and having combined labels on a steering wheel and the helmsman to a shaft. Tighten a nut of a steering shaft to the specified value of the moment of an inhaling. The inhaling moment: a nut of a steering shaft (a): 33 Н•м (3.3 kg th, 23.5 pounds-foots). Establish the module (having inflated) pillows of safety of the driver on a steering wheel. See in the given Chapter Has undressed the Module (having inflated) pillows of the driver.

Not a cabriolet

1 — a teeth
2 — grooves
3 — levelling labels

Cabriolet

1 — a teeth
2 — grooves
3 — levelling labels