Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
- Wheels and tyres
    The general description
    Diagnostics
    Servicing and small adjustment
   - Service out of a workshop
      Wheel
       The tyre
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





Service out of a workshop

Wheel

Removal

 PERFORMANCE ORDER

  1. Ослабьте wheel nuts approximately on 180 (half-turn).
  1. Lift the car.
  2. Remove a wheel.

Never use heating to weaken a hard wheel as it can reduce service life of a wheel and damage wheel bearings.

Installation

Wheel nuts should be tightened in certain sequence and to the specified value of the moment of an inhaling, differently the wheel either a brake drum or a disk can be bent. The inhaling moment: a wheel nut (a) — 100 Н•м (10.0 kg th, 72.5 pounds-foots).

Before installation of wheels remove from a mounted surface of wheels and a brake drum or a disk коррозийные formations by means of a rigid wire brush. If at installation of wheels there is no good contact of metal to metal of mounted surfaces, it can cause easing of wheel nuts that further can lead слетанию wheels at car movement.