Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
- Suspension bracket
   - Forward suspension bracket
      The general description
       Service out of a workshop
    Back suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Fuel system
Ignition system
Start system
Release system
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment

Suspension bracket

Forward suspension bracket

The general description

  • All fixing elements of a forward suspension bracket are very important, as work of the basic parts and systems depends on them, and-or they can affect repair cost. In need of their replacement it is necessary to use only details with the same number or similar details. Never use for replacement suitable details more poor quality. To provide good fastening of a detail at its replacement it is necessary to use the specified values of the moment of an inhaling.
  • Never try to heat up, temper or straighten any parts of a forward suspension bracket. Replace the damaged part new, differently it will break.

The forward suspension bracket represents an independent suspension bracket on racks. The top end of a rack fastens to a body rack support. The rack and its support are isolated from each other rubber оправкой.

The bottom end of a rack incorporates to the top end of a rotary pin, and the bottom end of a rotary pin incorporates to a hairpin of a spherical tip which is an element of the lever of a suspension bracket. And this rotary pin incorporates to a tip of steering draught.

Thus, steering wheel movement is transferred to a tip of steering draught, and then on a pin, forcing to move wheels.

1 — a body
2 — a rack
3 — a rotary pin
4 — the suspension bracket lever (the bottom lever)

5 — a hairpin with a spherical tip
6 — the wheel bearing
7 — a flange of a drive of an axis of a shaft
8 — a wheel