Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
- Suspension bracket
   - Forward suspension bracket
      The general description
       Diagnostics
      - Service out of a workshop
         The stabilizer of cross-section stability/plug
         Shock-absorber rack
         Cylindrical spring
         The terminator of a dynamic course of a suspension bracket / a rubber nest of a spring
         Wheel nave (including the wheel bearing)
         Sharnir/os rotations
         The suspension bracket/plug lever
    Back suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





Service out of a workshop

The stabilizer of cross-section stability/plug

Removal

 PERFORMANCE ORDER

  1. Lift the car.
  2. Remove bolts fixing скобы the stabilizer of cross-section stability (7).
  3. Remove nuts of the spherical hinge of the stabilizer (6), washers (5) and plugs (4).
  4. Remove the stabilizer of cross-section stability (2) together with spherical hinges (3).
  5. Disconnect spherical hinges of the stabilizer (3) from a bar of the stabilizer (2).
1 — the suspension bracket lever
2 — the stabilizer of cross-section stability
3 — spherical hinges of the stabilizer
4 — the plug
5 — a washer
6 — nuts of the spherical hinge of the stabilizer
7 — bolts fixing скобы the stabilizer of cross-section stability

Installation

For correct installation of a bar of the stabilizer of cross-section stability, on both parties, be convinced that the colour paint (1) on a stabilizer bar is combined with the fixing plug (3) on the right and at the left.


1 — the painted part
2 — скоба the fixing plug
3 — the fixing plug

 PERFORMANCE ORDER

  1. Connect spherical hinges and a stabilizer bar.
  2. Establish spherical hinges of the stabilizer on operating levers.

Do not tighten till the end of a nut of the spherical hinge of the stabilizer.

  1. Establish скобы the fixing plug of a bar of the stabilizer.
  2. At stabilizer installation collect all its parts, without tightening them to check up stabilizer centering on the parties. Be convinced that the spherical hinge costs in neutral position at a sight from the top party of a body.
  3. Tighten bolts скобы the stabilizer and a nut of the spherical hinge of the stabilizer to the specified value of the moment of an inhaling.

The inhaling moment:

  • Nut of the spherical hinge of the stabilizer (a): 26 Н•м (2.6 kg th, 19.0 pounds-foots)
  • Nut of the spherical hinge of the stabilizer (b): 50 Н•м (5.0 kg th, 36.5 pounds-foots)
  • Bolt скобы the stabilizer (c): 23 Н•м (2.3 kg th, 17.0 pounds-foots)