Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
- Transfer
   The general description
    Diagnostics
    Service out of a workshop
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





Transfer

The general description

At towage of the car for the purpose of repair or other purpose observe instructions on the towage, stated in the Operation manual.

In the aluminium case of transfer connected directly with a back part of a transmission, there is a primary transfer, an intermediate shaft and the transfer mechanism, the conducted back shaft, a conducted gear wheel of the first transfer and a conducted forward shaft (for a forward drive), connected in a chain.

Transfer has such selective mechanism which allows the lever of the control of a gear change to choose high speed (direct connection with a transmission exit: a secondary shaft), low speed (decrease in speed by primary transfer, intermediate transfer and a conducted gear wheel of the first transfer) or neutral (the transitive plug located between primary transfer and conducted by a gear wheel of the first transfer), and a drive choice on two wheels (only on high speed) or a drive on four wheels (on high or low speed) the plug of coupling of the forward drive, being in the centre of a conducted back shaft. Besides, the synchronizer established on coupling of a forward drive, allows to change a movement mode between movement with a drive for two wheels (only on high speed) and a drive on four wheels (only on high speed), even during movement.

The plug of inclusion of transfers of a forward drive has the auxiliary spring providing possibility of soft switching from 4Н in 2Н.

The case has a flute for oil and a plate on the synchronizer for maintenance of due greasing, even in operation severe constraints.