Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
- Transfer
   The general description
   - Diagnostics
      The diagnostic table
    Service out of a workshop
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





Diagnostics

The diagnostic table

Before to try to repair transfer or the components connected with it concerning any malfunctions, except mechanical, it is necessary to define a malfunction mode and the possible reason.

Malfunctions of transfer are found out at occurrence of difficulties at switching, for example, the excessive effort necessary for switching of transfer, knock of gear wheels or extra earnings of gear wheels. When there is any of these conditions, it is necessary to spend the following check before to assort transfer:

 PERFORMANCE ORDER

  1. To check up level of oil of transfer about its sufficiency or conformity of type of oil. The Section Check Transformer and редукторное oils in the Head Maintenance service and greasing see.
  2. To check up fixing elements of transfer on deterioration or weakening.
  3. To check up the gear change lever on a warp, deformation or excessive deterioration.

After performance of the checks set forth above pass to the following table of diagnostics.

Condition

The possible reason

Elimination

The gear wheel jumps out from a hook

The axis of a plug of switching is worn out

To replace

The plug of switching or synchronizer zolotnik is worn out

To replace

The adjusting spring is weakened or damaged

To replace

Bearings on a conducted back shaft are worn out

To replace

The rounded off tooth on a zolotnik or a gear wheel is worn out

To replace a zolotnik and a gear wheel

The lock ring (rings) does not suffice or is faulty

To repair or replace

Gear wheels "do not wish" to be uncoupled

The synchronizer spring is weakened or broken

To replace

The shaft of switching or switching plug is deformed

To replace

The complicated switching

The spring of a shaft of switching of a forward drive is weakened

To replace

The lock ring and washer of a shaft of switching of a forward drive are deformed or incorrectly located

To replace

Inadequate or insufficient greasing

Add transfer oils

The synchronizer ring is worn out

To replace

The rounded off tooth on a zolotnik or a gear wheel is worn out

To replace a zolotnik and a gear wheel

The switching shaft is deformed

To replace

Noise

Inadequate or insufficient greasing

Add transfer oils

The bearing () is damaged or worn out

To replace

The gear wheel (gear wheels) is damaged or worn out

To replace

The synchronizer ring is damaged or worn out

To replace

The rounded off tooth on a zolotnik or a gear wheel is worn out

To replace a zolotnik and a gear wheel