Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Fuel system
Ignition system
Start system
Release system
- Transfer
   The general description
   - Service out of a workshop
      Oil of a distributing box
      The gear change lever
      The switch of transfer of the all-wheel drive car
       Oil epiploons of transfer
      The gauge of speed
      Back fixture of the engine
      The transfer module
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment

Service out of a workshop

Oil of a distributing box

Check and replacement


    Before check and oil replacement switch off the engine and lift the car horizontally. At the lifted car check up level of a liquid and leak. If leak is found out, adjust or eliminate it.

The diagramme of viscosity SAE (society of automobile engineers of the USA)

    Merge old oil, having removed a drain stopper (1).
  • Each time at lifting of the car for any service check, whether there is no oil leak, and a condition of hoses сапуна.
  • If in the merged oil there will be a water or a rust impurity, check up a hose сапуна and a transfer casing.
    Fill in the new specified oil, to the specified volume (to уровневого apertures).

Very much it is recommended to use oil for transfer SAE 75 W-90.

    The specification of oil for transfer:
      Oil mark: API GL-4 Viscosity: SAE 75 W-85, 75 W-90 or 80 W-90 Oil volume: 1.7 litres (3.6/3.0 США/Imp. Pints)
    Tighten a drain stopper (1) and urovnevuju / a filling stopper (2) to the specified value of the moment of an inhaling, having put preliminary on a carving of stoppers (1 and 2) hermetic. “A”: hermetic 99000-31110. The inhaling moment (a): 23 Н•м (2.3 kg th, 17.0 pounds-foots).
1 — a drain stopper
2 — urovnevaja / a filling stopper
3 — the transfer case