Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Fuel system
- Ignition system
    System of ignition for engine G16
   - System of ignition for engine J20
       The general description
      - Vehicle service
         Check and adjustment of time of an advancing of ignition
         Assemblage of the coil of ignition (an igniter and the ignition coil)
         Spark plug
         CMP-sensor control
      The specification, inhaling twisting moment
      The special tool
Start system
Release system
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment

Spark plug



    Disconnect муфту ignition coils. Remove a bolt of the coil of ignition (1), and then extend assemblage of the coil of ignition (2). Remove a spark plug (3).
Engine J20.


At service iridievyh / platinum spark plugs (type of candles with a thin central electrode), do not touch the central electrode not to damage it. An electrode not strong enough to sustain mechanical effort, and its material also mechanically not so strong.


    Check up them on deterioration of electrodes, carbon adjournment, it is damaged
    ие isolation.
    If any malfunction is found out, adjust an air backlash, clear a special cleaner for свеч ignitions or replace them with new candles as it is specified.
      Air backlash of a spark plug "a": 1.0-1.1 mm (0.039 - 0.043 inches) Spark plug type: DENSO K20PR - U11/SK16PR11, NGK BKR6E-11/*IFR5J11

At temperature more low - 25 C (-13F), it is recommended to use candles with a sign (*) for the best work of the engine.



    Establish a candle () ignitions (3) and tighten them according to the specified twisting moment of an inhaling. An inhaling twisting moment: a candle () ignitions: 25 Н•м (2.5 kg th, 18.0 pounds-foots). Establish assemblage of the coil of ignition (2) reliably. Tighten a bolt of the coil of ignition (1), and then connect муфту ignition coils.
Engine J20.