Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
- Electric equipment
    Body electric equipment
    Illumination system
   - Electric equipment system
      - The general description
          The battery
         The generator
       Diagnostics
       The works made on the car
       Major repairs
       Specifications
      The inhaling moments
    Tools/information for drivers





The generator

The generator is small, but high-efficiency, includes regulator IC.

Internal components of the generator are connected among themselves by electric communications, as is shown in an illustration more low.

The generator consists of following components:

    The semi-conductor regulator (stabilizer) is built in in the generator from within. All components of a regulator are protected by the one-piece form. This device together with assemblage of the holder of a brush is attached to the back case. Regulator IC uses integrated microcircuits and supervises the pressure made by the generator, and adjusting parametres cannot be adjusted. Bearings of a rotor of the generator contain greasing enough that relieves of necessity periodically them to grease. Two brushes transfer a current through two ring current collectors to an excitation winding on a rotor and under normal conditions works do not demand service during the long period of time. The winding статора is built in from the inside шихтованного магнитопровода which forms the generator case. The condenser of the back case suppresses a radio noise.

Service regulations of generators of following three types depend on their specifications.

Type 60 A

1 — the generator with stabilizer assemblage
2 — regulator IC
3 — the coil статора
4 — the diode
5 — an excitation winding (the rotor coil)

6 — a lamp of the indicator of a charge
7 — the main switch
8 — the battery
9 — a lamp of a charge (light-emitting diode)

Type 70 A and 80 A

1 — the generator with stabilizer assemblage
2 — regulator IC
3 — the coil статора
4 — the diode
5 — an excitation winding (the rotor coil)

6 — a lamp of the indicator of a charge
7 — the main switch
8 — the battery
9 — a lamp of a charge (light-emitting diode)

Type 60 A

1 — a pulley
2 — a pulley nut
3 — the rotor fan
4 — the coil статора
5 — магнитопровод статора
6 — an excitation winding
7 — the stabilizer
8 — a brush
9 — a back frame

10 — a frame from outside a drive
11 — a forward cover
12 — the Back cover
B — a generator socket (the battery Plug)
D — the false plug
E — grounding
F — the plug of a winding of excitation
IG — the ignition plug
L — the lamp plug

Type 70 A

1 — a pulley
2 — a pulley nut
3 — the rotor fan
4 — the coil статора
5 — магнитопровод статора
6 — an excitation winding
7 — the stabilizer
8 — a brush
9 — a back frame

10 — a frame from outside a drive
11 — a forward cover
12 — the Back cover
B — a generator socket (the battery Plug)
D — the false plug
E — grounding
F — the plug of a winding of excitation
IG — the ignition plug
L — the lamp plug

Type 80 A

1 — a pulley
2 — a pulley nut
3 — the rotor fan
4 — the coil статора
5 — магнитопровод статора
6 — an excitation winding
7 — the stabilizer
8 — a brush
9 — a back frame

10 — a frame from outside a drive
11 — a forward cover
12 — the Back cover
B — a generator socket (the battery Plug)
D — the false plug
E — grounding
F — the plug of a winding of excitation
IG — the ignition plug
L — the lamp plug