|
Suzuka Grandee Vitara The general information Maintenance service and greasing Heater, ventilation and the conditioner Steering Suspension bracket Wheels and tyres Forward приводной a shaft shaft/bearing. An oil epiploon Kardannye shaft Brake system Engines Fuel system Ignition system Start system Release system - Transmissions Mechanical transmission (type 1) Mechanical transmission (type 2) - Automatic transmission (4 A/T) The general description Diagnostics of an automatic transmission Safety measures at diagnostics of malfunctions Visual survey Service out of a workshop - System of blocking of brakes Solenoidal blocking of switching Procedure of solenoidal blocking of switching Manual unblocking of solenoidal blocking of switching System check Coupling Transfer Forward and back differentials Windows, mirrors, locks and security measures. An immobilizer Electric equipment |
Procedure of solenoidal blocking of switching When the lever of a choice of transfer is in position “P”, the ignition key is in position “ON” (ВКЛ) and pressing of a pedal of a brake causes electric current receipt to the solenoid. When draught of the solenoid of blocking of switching (or a blocking plate) moves to the solenoid in this condition, the blocking cam (or a latch hairpin) is released that further allows the lever of a choice of transfer to be switched from position “P” in any other position. Even when the lever of a choice of transfer is in position “P” if the ignition key is in position “LOCK” ("BLOCKING") or “ACC”, or the brake pedal is not pressed, the electric current does not arrive to the solenoid. In this condition draught of the solenoid of blocking of switching (or the blocking plate) is pushed from the solenoid with effort of a spring, and it obstructs to traffic of a cam of blocking (or latch hairpins). Thus, the button on the lever of a choice of transfer does not work, even by pressing, and the lever of a choice of transfer is not switched. Тип-1
Тип-2
|
|