Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
- Suspension bracket
    Forward suspension bracket
   - Back suspension bracket
      The general description
      - Diagnostics
         The diagnostic table
         Shock-absorber check
         Check of the bottom draught, the top draught, lateral draught
          Check of the case of the bridge and cylindrical spring
         Check of a stopper of the bearing and internal oil epiploon of the bridge
         Check of a wheel disk, nut and the bearing
       Service out of a workshop
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Fuel system
Ignition system
Start system
Release system
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment

Check of a wheel disk, nut and the bearing


    Check up each wheel disk on presence of dents, deformations and cracks. It is necessary to replace strongly damaged disk.
    Check up an inhaling of nuts of a nave of a wheel and, if necessary, tighten to the specified value of the moment of an inhaling. The inhaling moment: a wheel nut (a) — 100 Н•м (10.0 kg th, 72.5 pounds-foots).
    Check up wheel bearings on deterioration. To measure люфт, remove from the middle of a wheel a cap and put the device with a dial to the bridge centre. Border люфта the wheel bearing: 0.8 mm (0.03 inches).
    If measurement exceeds this border, replace the bearing.
    Rotating a wheel, check up the bearing on noise and smoothness of rotation. If defect is found out, replace the bearing.