Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
- Suspension bracket
Forward suspension bracket
- Back suspension bracket
The general description
Diagnostics
- Service out of a workshop
The shock-absorber
Cylindrical spring
The bottom draught
The top draught
Lateral draught
The back bridge and the wheel bearing
Internal oil epiploon of the back bridge
The case of the back bridge
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment
|
The top draught
Removal
|
|
Lift the car and remove a back wheel.
|
|
If there is a system of antiblocking of brakes ABS, disconnect the plug of a wire of the gauge of speed of a wheel (1) from the left top draught (2).
|
Remove the top draught (1).
|
|
1 — the top draught
2 — a bolt |
|
|
Installation
|
|
Establish the top draught (3) on a frame of the chassis and the bridge case; the direction of bolts at installation is shown in drawing more low. A nut do not tighten.
In drawing direction definition at installation for the left top draught (3) at the car with system of antiblocking of brakes ABS is shown.
Attach the plug of a wire of the gauge of speed of a wheel (4) to the top draught (3) (if there is a system of antiblocking of brakes ABS).
|
|
1 — a forward bolt of the top draught
2 — a nut
3 — the left top draught
5 — a back bolt of the top draught
6 — a washer
7 — the body centre
8 — the forward party |
|
|
Lower the lift and in not loaded condition of the car tighten a forward bolt and a back nut of the top draught to the specified value of the moment of an inhaling.
The inhaling moment:
Forward bolt of the top draught (a): 95 Н•м (9.5 kg th, 69 pounds-foots)
Back bolt of the top draught (b): 90 Н•м (9.0 kg th, 65 pounds-foots)
|
|
|
|
|