Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
- Wheels and tyres
    The general description
    Diagnostics
   - Servicing and small adjustment
      - Wheel and the tyre
         Hairpins
         The combined tyres and wheels (for the car with steel wheels)
         Inflating of tyres
         The table on tyres
         Mutual shift of tyres
    Service out of a workshop
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment






The combined tyres and wheels (for the car with steel wheels)

Tyres and wheels are combined in the conditions of industrial assemblage. It means that radially the most rigid part of the tyre, or an acting place, is combined with the least radius, or the deepest place wheels. It becomes for maintenance of the most smooth course.

The acting place tyres usually is marked by a put paint a point (1) on an external lateral wall. In due course this point (1) is washed off from the tyre.

The deepest place wheels is initially marked by a put paint a point (2) on закраине wheel rims. At correct assemblage the point on a rim of a wheel (2) is combined with a point on the tyre (1).

If the tyre acts in film from a wheel at its installation into place it should be combined with a wheel correctly. If the point (1) on the tyre is not present, before tyre removal it is necessary to scratch labels on the tyre and a wheel that at installation to combine them and to collect a wheel in a starting position.