Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Fuel system
Ignition system
Start system
Release system
- Transmissions
    Mechanical transmission (type 1)
   - Mechanical transmission (type 2)
      - The general description
         Definition of type of transfer
         The system description
    Automatic transmission (4 A/T)
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment

The system description

The manual transmission consists of a leading shaft, the basic shaft, a countershaft and transfer of the backing, the established in aluminium and cast cases. Its transfers represent five forward speeds in synchronous gearing and one speed of a backing in system of constant gearing.

Transfers of the basic shaft keep on needle bearings, and on them rings of the synchronizer and a sleeve and synchronizer naves are established.

The case of the lever of a gear change is above behind the case of a transmission and has a cam which does not allow to direct transfer to be switched from fifth speed to a backing.

As aluminium and cast cases are sealed by a lining of liquid type at their assemblage after dismantling it is necessary to put original hermetic or its analogue on adjoining surfaces.

Besides, connecting bolts of the case should be tightened a wrench to the specified value of the moment of an inhaling, avoiding unduly strong or unduly weak tightening.