Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
- Steering
    Suspension bracket, wheels and tyres
    Adjustment of corners of installation of wheels of a forward suspension bracket
    System of the hydraulic booster of a wheel
   - Steering wheel and steering column
       Steering wheel and steering column the safety not equipped with a pillow
      - Steering wheel and steering column with a safety pillow
         The general description
          Diagnostics
         - Service out of a workshop
             Safety measures at service
            The module (having inflated) pillows of the driver
             Steering wheel
            The contact coil and подрулевые switches
            Steering column (at not a cabriolet)
            The top shaft of a steering (at not a cabriolet)
            Steering column (at a cabriolet)
            The steering lock (the ignition switch)
            The bottom shaft of a steering
            Check of a steering column and the top shaft of a steering on presence of damages at failure (at not a cabriolet)
            Check of a steering column on damages at failure (at a cabriolet)
            The lever of an adjustable unblocking of a steering column
         Specifications of the moment of an inhaling
         The special tool
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





The steering lock (the ignition switch)

Removal

 PERFORMANCE ORDER

  1. Remove a steering column (1). Sections the Steering column (at not a cabriolet) and the Steering column (at a cabriolet) See in the given Chapter.
Not a cabriolet.
Cabriolet.
  1. With the help центрового the puncher (1), ослабьте also remove fixing bolts (2) steering locks.

Be cautious not to damage the puncher aluminium parts of the steering lock.

  1. Turn the ignition key in position “ACC” or “ON” and remove the steering lock from a steering column.

Installation

 PERFORMANCE ORDER

  1. Arrange an oblong aperture of a steering shaft (2) in the middle of an aperture in a column.
  2. Turn the ignition key in position “ACC” or “ON” and will put the steering lock on a column
  3. Now turn the ignition key in position “LOCK” and take out from the lock.
  4. Combine the plug of the lock with an oblong aperture of a steering shaft and повращайте a shaft to be convinced that it is blocked.
1 — a steering column
  1. Tighten new bolts until at them heads will not be broken off.
  1. Turn the ignition key in position “ACC” or “ON” and check up that the steering shaft rotates smoothly. Also check up lock work.
  2. Establish a steering column as it is described in the given Chapter in Sections the Steering column (at not a cabriolet) and the Steering column (at a cabriolet).