Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
- Steering
Suspension bracket, wheels and tyres
Adjustment of corners of installation of wheels of a forward suspension bracket
System of the hydraulic booster of a wheel
- Steering wheel and steering column
Steering wheel and steering column the safety not equipped with a pillow
- Steering wheel and steering column with a safety pillow
The general description
Diagnostics
- Service out of a workshop
Safety measures at service
The module (having inflated) pillows of the driver
Steering wheel
The contact coil and подрулевые switches
Steering column (at not a cabriolet)
The top shaft of a steering (at not a cabriolet)
Steering column (at a cabriolet)
The steering lock (the ignition switch)
The bottom shaft of a steering
Check of a steering column and the top shaft of a steering on presence of damages at failure (at not a cabriolet)
Check of a steering column on damages at failure (at a cabriolet)
The lever of an adjustable unblocking of a steering column
Specifications of the moment of an inhaling
The special tool
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment
|
The bottom shaft of a steering
|
|
Never turn a steering wheel at the removed bottom steering shaft. If a steering wheel to turn and bring down from the central position the contact coil (on подрулевых switches), it again should be aligned. Turn of a steering wheel more, than on two and a half a turn will break the contact coil. |
Removal
|
|
Turn a steering wheel so that forward wheels of the car have been directed directly forward.
Turn the ignition switch in position “LOCK” and take out a key.
Put levelling labels (3) on муфту a shaft (2) and a shaft (on the party of the top shaft or on the column party) that on them correctly to establish into place.
|
|
1 — a steering column
2 — муфта a steering shaft
3 — labels |
Having removed a bolt (4) with муфты a shaft from outside the top shaft or a column and having weakened a bolt (5) from outside the bottom shaft, pull муфту a shaft (2) towards the bottom shaft (as shown arrows in drawing more low).
|
|
1 — the top shaft or a steering column
2 — муфта a shaft
3 — the bottom steering shaft
4 — a bolt from outside the top shaft
5 — a bolt from outside the bottom shaft |
Put levelling labels on bottom муфту bottom a shaft an and шестеренчатый a shaft that on them correctly to establish.
|
|
Remove a bolt (2) bottom муфты the bottom shaft, then remove the bottom shaft.
|
Remove a bolt муфты a shaft (from outside the bottom shaft) with муфты a shaft, then remove муфту a shaft (3) from the bottom shaft (1).
|
|
Installation
|
|
Be convinced that forward wheels and a steering wheel are directed directly forward.
|
|
Combine a flat part “A” the bottom shaft with an aperture for a bolt “B” муфты a shaft (2). Then insert муфту a shaft into the bottom shaft.
|
Establish a bolt муфты a shaft (from outside the bottom shaft) on муфту a shaft. Tighten manually.
Insert шестеренчатый a shaft in bottom муфту the bottom shaft (2) шлицей (1) bottom муфты, having combined labels (4) on шестеренчатом to a shaft (5) and картере transmissions (6).
Then establish a bolt (3) bottom муфты the bottom shaft on bottom муфту the bottom shaft (2). Tighten to the specified value of the moment of an inhaling. The inhaling moment: a bolt bottom муфты the bottom shaft (): 25 Н•м (2.5 kg th, 18.0 pounds-foots).
|
|
1 — the bottom steering shaft
2 — bottom муфта
3 — a bolt bottom муфты
4 — муфта a steering shaft
5 — шестеренчатый a shaft
6 — картер transmissions |
Establish муфту a steering shaft (2) on a steering shaft, having combined the labels (3) put before removal.
|
|
Be convinced that forward wheels and a steering wheel are directed directly forward. |
|
|
1 — the top shaft or a steering column
2 — муфта a steering shaft
3 — labels |
|
|
Establish a bolt муфты a shaft (from outside the top shaft or a column) (2) on муфту a shaft (1). At first tighten a bolt муфты a shaft (from outside columns) (3) to the specified value of the moment of an inhaling, and then a bolt муфты a shaft (from outside the bottom shaft) to the specified value of the moment of an inhaling. The inhaling moment: a bolt муфты a shaft (b): 25 Н•м (2.5 kg th, 18.0 pounds-foots).
|
|
|
|
|