Suzuka Grandee Vitara
- The general information
    Safety measures
   The basic safety measures
   Safety measures at work with the catalyst
   Safety measures at service of electric chains
    Procedure of check of electric chains
   Interrupting or weak connection
   Safety measures at installation of means of a mobile communication
    The identification information
   Warning, warning and information labels
   Places of lifting of the car
   The list of the reductions used in the given management
    The metric information
   The standard moments of inhalings
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





The standard moments of inhalings

Each bolt should be tightened according to the moment specified in each section of this management. If to such information it is not presented, use the following table of the applicable moments of an inhaling, for each bolt. At bolt use, stronger, than original, seize the moment specified for the original.

For фланцевых bolts, фланцевых nuts and самоконтрящихся durability nuts 4T and 7T add 10 % by the time of an inhaling, specified in the table more low. The table is applicable only for легкосплавных or steel connectors.

The table of the moments of an inhaling

Durability class Diameter of a carving (nominal diameter) (mm)
4 5 6 8 10
Bolts durabilities equivalent to a class 4T Н•м 1.5 3.0 5.5 13 29
Kg th 0.15 0.30 0.55 1.3 2.9
Pounds-foots 1.0 2.5 4.0 9.5 21.0
Bolts durabilities equivalent to a class 6.8 Н•м 2.4 4.7 8.4 20 42

Kg th 0.24 0.47 0.84 2.0 4.2
Pounds-foots 2.0 3.5 6.0 14.5 30.5
Bolts durabilities equivalent to a class 6.8 with a flange Н•м 2.4 4.9 8.8 21 44
Kg th 0.24 0.49 0.88 2.1 4.4
Pounds-foots 2.0 3.5 6.5 15.5 32.0
Bolts durabilities equivalent to a class 7T Н•м 2.3 4.5 10 23 50
Kg th 0.23 0.45 1.0 2.3 5.0
Pounds-foots 2.0 3.5 7.5 17.0 36.5
Bolts durabilities equivalent to a class 8.8 without a flange Н•м 2.5 6.3 11 27 56
Kg th 0.31 0.63 1.1 2.7 5.6
Pounds-foots 2.5 4.5 8.0 19.5 40.5
Bolts durabilities equivalent to a class 8.8 with a flange Н•м 3.2 6.5 12 29 59
Kg th 0.32 0.65 1.2 2.9 5.9
Pounds-foots 2.5 5.0 9.0 21.0 43.0

Durability class Diameter of a carving (nominal diameter) (mm)
12 14 16 18
Bolts durabilities equivalent to a class 4T Н•м 45 65 105 160
Kg th 4.5 6.5 10.5 16
Pounds-foots 32.5 47.5 76.0 116.0
Bolts durabilities equivalent to a class 6.8 Н•м 80 125 193 280

Kg th 8.0 12.5 19.3 28
Pounds-foots 58.0 90.5 139.5 202.5
Bolts durabilities equivalent to a class 6.8 with a flange Н•м 84 133 263 298
Kg th 8.4 13.3 20.3 29.8
Pounds-foots 61.0 96.5 147.0 215.5
Bolts durabilities equivalent to a class 7T Н•м 85 135 210 240
Kg th 8.5 13.5 21 24
Pounds-foots 61.5 98.0 152.0 174.0
Bolts durabilities equivalent to a class 8.8 without a flange Н•м 105 168 258 373
Kg th 10.5 16.5 25.8 37.3
Pounds-foots 76.0 121.5 187.0 270.0
Bolts durabilities equivalent to a class 8.8 with a flange Н•м 113 175 270 395
Kg th 11.3 17.5 27 39.5
Pounds-foots 82.0 126.5 195.5 286.0

* Самоконтрящаяся a nut