Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
- Transmissions
    Mechanical transmission (type 1)
    Mechanical transmission (type 2)
   - Automatic transmission (4 A/T)
       The general description
       Diagnostics of an automatic transmission
       Safety measures at diagnostics of malfunctions
       Visual survey
       Service out of a workshop
       System of blocking of brakes
      - System check
         The main cable of blocking
         Transmission removal (if there is a transfer)
         Installation
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





Installation

At moving of a transmission with the hydrotransformer established on it watch that it was in horizontal position. If it bends a forward part, the hydrotransformer can fall that can lead to a trauma.

For installation into place execute removal procedure upside-down. Follow resulted more low and at the left values of the moment of an inhaling.

The inhaling moment

Н•м

Kg th

Pounds - foot

Bolts and nuts of connection of an exhaust pipe №1 and main

50

5.0

36.5

Nuts of connection of the muffler with an exhaust pipe №2

60

6.0

43.5

Universal фланцевые connecting bolts and nuts

50

5.0

36.5

* Bolts of a tube of filling of oil

* Bolts of an arm of a cable of a choice of transfer

23

2.3

17.0


1 — an automatic transmission
2 — transfer (a full drive)

3 — back fixture of the engine
4 — a back fixing element of the engine


The inhaling moment.

1 — a drive plate
2 — the hydrotransformer
3 — rigid fastening of the case on the right (if is)

4 — an automatic transmission
And — hermetic 99000-31110


The inhaling moment.

 PERFORMANCE ORDER

  1. Reliably fix wires and hoses.
  2. Adjustment of a cable of a choice of transfer is described in Section a gear change Cable.
  3. Adjustment of a cable of a throttle of an automatic transmission is described in Section the Cable of a throttle of an automatic transmission.
  4. For pouring of a liquid of an automatic transmission and adjustment of its level follow procedure of check of level of a liquid.
  5. Attach the battery and check up that the engine and a transmission work normally.
  6. At installation of a plate of a drive use special bolts.