Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
- Forward and back differentials
   - Forward диффренциал
       The general description
       Diagnostics
      - Service out of a workshop
          Servicing
          Check
         - Removal and installation
            Differential accessories
         Removal
         Installation
    Back differential
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment






Removal and installation

Differential accessories

 PERFORMANCE ORDER

    Lift the car and turn a steering wheel to the right. Separate fixing arm R from the differential case, having removed bolts from its bottom part. Remove fixing arm R, having removed a forward fixing bolt from its top part.
1 — a fixing bolt of an arm
2 — fixing arm R
3 — the differential case
2 — fixing arm R
3 — the differential case
4 — a forward fixing bolt
    Remove fixing arm L, having removed the top and bottom fixing bolts.
1 — the differential case
2 — a forward fixing bolt
3 — fixing arm L
4 — a bolt of a fixing arm
    Check up a condition of each plug. If it is damaged or spoilt, pull out its special tool and a hydraulic press and replace.
      The special tool
        (a): 09951-26010 (b): 09951-16080
1 — a fixing arm
    At installation on a press arrange шлицу in each plug.
1 — fixing arm L
2 — the plug
3 — fixing arm R
And — alignment шлицы 45
    Arrange each plug on an arm. Length “a”: 3.0 mm (0.12 inches).
1 — fixing arm R
2 — fixing arm L
    At installation observe following values of the moment of an inhaling:
      The inhaling moment
        (a): 85 Н•м (8.5 kg th, 61.5 pounds-foots) (b): 50 Н•м (5.0 kg th, 36.5 pounds-foots)

Back fixture (for the holder of forward differential)

Integral type

 PERFORMANCE ORDER

    Lift the car and remove a fixing design, having removed two bolts and nuts from outside the holder of differential and 2 bolts and nuts from outside cross-beams. Check up fixing rubber on damages and deterioration of a condition and replace if necessary. At installation observe following value of the moment of an inhaling. The inhaling moment (a): 50 Н•м (5.0 kg th, 36.5 pounds-foots).
1 — a bolt and a nut of a back fixing arm
2 — the holder of differential
3 — a cross-beam
4 — a bolt of a back fixing arm
5 — back fixture of differential

Type with the plug

 PERFORMANCE ORDER

    Lift the car and remove a back fixing arm, having removed a back fixing bolt and bolts of a back fixing arm. Check up fixing rubber on damages and deterioration of a condition and replace if necessary. At installation tighten back fixing bolts and bolts of a back fixing arm to the specified value of the moment of an inhaling.
      The inhaling moment:
        Back fixing bolt (a): 85 Н•м (8.5 kg th, 61.5 pounds-foots) Bolts of a back fixing arm (b): 50 Н•м (5.0 kg th, 36.5 pounds-foots)
1 — a back fixing bolt
2 — a bolt of a back fixing arm
3 — a back fixing arm