Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
- Suspension bracket
   - Forward suspension bracket
      The general description
      - Diagnostics
         The diagnostic table
         Check of the stabilizer of cross-section stability and the plug
         Check of a rack of the shock-absorber and-or cylindrical spring
         Check of the lever of a suspension bracket/hinge
         Check of the hinge of the lever of a suspension bracket
         Check of the plug of the lever of a suspension bracket
         Check of a wheel disk, nut and the bearing
       Service out of a workshop
    Back suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





Check of a rack of the shock-absorber and-or cylindrical spring

 PERFORMANCE ORDER

    Check up a rack on oil leak. If malfunction is found out, replace all rack entirely as it does not understand. Check up functionality of a rack Check up and modify pressure of air in wheels as it is specified. 3-4 times rock a body, pushing in front from outside checked rack. Each time push with identical force and pay attention to resistance of a rack at a push and return. Also pay attention to that, how many time will shake a body of the car to a stop after you will clean hands. Do the same for rack check on the other hand. Compare resistance of a rack and quantity качаний on the right and at the left. They should be identical. At a serviceable rack the body should stop, as soon as you will clean hands or after one-two small fluctuations. If there are doubts concerning racks, compare results of their check to check of other car with good racks.
    Check up on damages and deformations.
    Check up a rack boot on damages or cracks. Check up a spring nest on cracks or deformations. Check up deterioration of the terminator of a course of a suspension bracket. Check up оправку racks on deterioration, cracks or deformations. Replace faulty parts on points 2-10.