Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
- Brake system
   - Brake highway/hose the brake cylinder
      - The general description
         Assemblage of the main cylinder
         Assemblage of the brake amplifier
         - Assemblage LSPV (a regulator of brake forces of a back axis if is)
      Check and adjustment
    Forward brakes
    Lay and back brake
    Antiblocking brake system (ABS)
Fuel system
Ignition system
Start system
Release system
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment


Components LSPV can be divided into three groups as follows.

    "A": the sensor control block
      The basic parts of this block - lever and a spring which react to change in vehicle height in the loaded condition and will transform it to loading.
    "B": the management block hydraulic pressure
      The step piston and the mechanism of the valve which is carrying out linear regulation enters into this block.
    "C": the failure-safe block keeping working capacity at refusal of separate elements.
      The basic parts of this block – the chamber which reduces hydraulic pressure from brake system of forward wheels and the failure-safe piston which releases the valve mechanism in the management block, connected to a brake of a back wheel in case of occurrence of any malfunctions in brake system of forward wheels.

A — type A
B — type B
1 — the piston
2 — a cuff
3 — lever LSPV
4 — a sensor control spring

5 — from the primary chamber of the main cylinder (a brake of back wheels)
6 — from the secondary chamber of the main cylinder (a brake of forward wheels)
7 — to a brake of back wheels
8 — a pin
9 — an aperture for a bolt