Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
- Engines
    Mechanical part of engine G16
   - Mechanical part of engine J20
      - The general description
         The engine
         Engine greasing
       Routine maintenance
       Assembly armature of the engine
      The special tool
      Necessary service materials
      Technical characteristics of the rotating moment of an inhaling
    Engine cooling
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





Mechanical part of engine J20

The general description

The engine

For the cars equipped with additional restrictive system (pneumopillow):

  • Service of components or wires of system of a pneumopillow and round them should be carried out only by the authorised dealer of a Suzuka. Non-observance of safety measures can lead to inadvertent activation of the system or result system in a non-working condition. Therefore there can be serious damages.
  • Maintenance service should begin not earlier than in 90 seconds after deenergizing of the ignition key and switching-off of a negative cable from the accumulator. Otherwise, the system can be activated at the expense of reserve energy in the touch and diagnostic module (СДМ).

The engine represents the four-cylinder, four-cycle petrol unit of water cooling equipped клапанным with a drive with a double top camshaft, intended for V-shaped configuration of valves, and with 16 valves (4 valves on one cylinder).

The double top camshaft is established from above cylinder heads: it is set in motion коленвалом by means of synchronisation chains, and in system of a drive of the valve there are no pusher rods.