Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
- Forward and back differentials
   - Forward диффренциал
       The general description
       Diagnostics
      - Service out of a workshop
          Servicing
         - Check
            Control system of a full drive
            Drive
            The air pump
          Removal and installation
         Removal
         Installation
    Back differential
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment


Pour des avis précis, visitez https://www.guideavis.com/




The air pump

Removal/installation

 PERFORMANCE ORDER

    Disconnect air hoses and фитинг from the air pump. Having removed bolts, remove the pump
    For installation execute removal procedure upside-down. The inhaling moment: 13 Н•м (1.3 kg th, 9.5 pounds-foots).

Check

 PERFORMANCE ORDER

    Establish on the pump the special tool, the voltmeter and the battery.
1 — the pump
    Tighten an adjusting bolt of the special tool against the stop and close its lateral aperture for check of air by means of a fuel hose as a deaf stopper. The special tool (A): 09918-18110. Check up, that the motor started to work (its sound) when the battery is connected was audible, and stopped, when the specified pressure is reached. Check up, whether there is no air leak. The specified pressure: 30.0 – 45.0 кПа (0.30 – 0.45 kg/sm2, 4.25 – 6.40 pounds on sq. inch). Check up, that voltmeter indications were within resulted below values:
      When the motor works: 0 – 1 Volt When the motor has ceased to work: 10 – 14 Volt

Let's to the motor work continuously more than 10 seconds that it has not broken.