Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
- Start system
    The general description
   - Diagnostics
      Block repair
      Analysis
      Assemblage
      Survey
      Work check
      Specifications
      Type 0.9 кВ
   Necessary materials
   The special tool
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment






Survey

The piston

Check up the piston on deterioration. Replace, if it is necessary.

The electromagnetic switch

Insert the piston and release. The piston should return to initial position quickly. Replace it if it is necessary.

Check of a chain of the involving coil

Check up electroconductivity of conclusions ' S ' and ' M ' the electromagnetic switch. If there is no electroconductivity, the coil is opened also it it is necessary to replace.

Check of a chain of the keeping coil

Check up electroconductivity of a conclusion ' S ' the electromagnetic switch and the coil case. If there is no electroconductivity, the coil is opened also it it is necessary to replace.

Sleeve of a shaft of an anchor

Check up a sleeve on deterioration or damages. Replace, if it is necessary.

Brush

 PERFORMANCE ORDER

    Check up brushes on deterioration.
    Measure length of a brush and if it below a limit, replace a brush.

Length of a brush

Types 0.9 кВ and 1.2 кВ

Type 1.4 кВ

The standard

12.3 mm (0.44 inches)

16.5 mm (0.65 inches)

Limit

7 mm (0.28 inches)

    Establish brushes on щеткодержатель and check up, whether smooth movement.

Spring

Check up springs of brushes on deterioration, damage or other malfunctions. Replace, if it is necessary.

Tension of a spring of a brush

The standard

1.9 — 2.5 kg (3.97 pounds)

Limit

0.6 kg (1.32 pounds)

Щеткодержатель

 PERFORMANCE ORDER

    Check up brush movement in щеткодержателе. If the brush in щеткодержателе jams, believe, whether it is bent щеткодержатель and whether sliding surfaces are soiled. Clear or correct, if it is necessary.
    Check up electroconductivity between a positive conclusion of a brush and earthed щеткодержателем. If there is an electroconductivity, щеткодержатель is earthed
    It is earthed because of defect of isolation and should be replaced.

Anchor

 PERFORMANCE ORDER

    Check up a collector, whether there is no dirt and a deposit. Correct by means of an emery paper or a lathe if it is necessary.
    Check up, in regular intervals or the collector is worn out, having fixed an anchor on V-shaped blocks. If the deviation of an arrow of the indicator exceeds a limit, repair or replace.

The specification assumes more low that an anchor will not drive. It is necessary to replace a pognutyj anchor.

      Collector not the round
        The standard: 0.05 mm (0.002 inches) or less Limit: 0.4 mm (0.015 inches)
1 — an anchor
2 — the V-block
3 — a magnetic rack
4 — стрелочный the indicator
    Check up a collector on deterioration. If diameter of less limiting, replace an anchor.
      External diameter of a collector:
        The standard: 29.4 mm (1.16 inches) Limit: 28.8 mm (1.13 inches)
    Check up depth of isolation of a collector. Correct or replace, if it less limiting.
      Depth of isolation of a collector "a":
        The standard: 0.4 - 0.6 mm (0.015 - 0.023 inches) Limit: 0.2 mm (0.008 inches)

1 — a collector segment
2 — an insulator

Grounding check

Check up a collector and the anchor core. If there is an electroconductivity, the anchor is earthed also it it is necessary to replace.

Chain check

Check up electroconductivity between segments. If there is no electroconductivity in any checked points, the chain is opened, and it is necessary to replace an anchor.

Transfers

Check up internal and planetary transfers on deterioration, damage or other malfunctions. Replace, if it is necessary.

Gear and обгонная муфта

 PERFORMANCE ORDER

    Check up a gear on deterioration, damage or other damages.
    Check up that муфта it is stopped, if it to turn in a drive direction, and smoothly rotates in the opposite direction. Replace, if it is necessary.
    Check up a shaft teeth on deterioration or damage. Replace, if it is necessary.
    Check up smoothness of movement of a gear.

Sleeve of a forward casing

Check up a sleeve on deterioration or damage. Replace, if it is necessary.