Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
Transmissions
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
- Electric equipment
    Body electric equipment
    Illumination system
   - Electric equipment system
       The general description
       Diagnostics
       The works made on the car
      - Major repairs
         - The generator
            Removal
            Installation
            Dismantling [Type 60 A]
            Dismantling [Type 70 A and 80 A]
            Survey [Type 60 A]
            Survey [Type 70 A and 80 A]
            Replacement of brushes
            Assemblage [Type 60 A]
            Assemblage [Type 70 A and 80 A]
       Specifications
      The inhaling moments
    Tools/information for drivers





Installation

 PERFORMANCE ORDER

  1. Establish the generator on скобу the generator.
  2. Tighten generator bolts.
    • Inhaling twisting moment:
    • Assembly bolt of the generator (a): 23 Н•м (2.3 kg th, 17.0 pounds-foots)
    • Assembly bolt of the generator (c): 48 Н•м (4.8 kg th, 35.0 pounds-foots)
  1. Establish a generator belt (cooling fan). Address to the Head Cooling of the engine or Has undressed a generator Belt in this Chapter.
  2. Establish a belt of the fan of cooling (only for engine J20). Address to the Head engine Cooling.
  3. Connect a final wire "B" and муфту to the generator. An inhaling twisting moment (b): 6.9 Н•м (0.69 kg th, 5.0 pounds-foots)
  4. Establish a cylinder.
  5. Establish a hose of the air filter.
  6. Connect negative (-) a cable to the battery.
1 — the top bolt of the generator (short)
2 — the bottom bolt of the generator (long)
3 — plug "B"