Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
- Transmissions
   - Mechanical transmission (type 1)
      The system description
      Diagnostics
      - Service out of a workshop
         Oil for a transmission
         The gear change lever
         The illumination switch
         Back fixture of the engine
         Transmission removal
         Transmission installation
         The case-extension piece (for model with a drive on two wheels and engine G16 and J20)
         Oil epiploon of the case-extension piece (for model with a drive on two wheels and engine G16 and J20)
    Mechanical transmission (type 2)
    Automatic transmission (4 A/T)
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





Oil epiploon of the case-extension piece (for model with a drive on two wheels and engine G16 and J20)

Removal and installation

 PERFORMANCE ORDER

  1. Remove карданный a shaft as it is described in Head Kardannye shaft, in Razdele Kardannyj a shaft.
  1. By means of a screw-driver remove an oil epiploon (1) from the case-extension piece (2).
  1. By means of the special tool (A) and a plastic hammer establish a new oil epiploon (1) in the case-extension piece (2) until the oil epiploon (1) will not concern a step part of the case-extension piece (2). Do not forget to put greasing on edge of an oil epiploon. “A”: greasing 99000-25010. The special tool (A): 09951-16060.
  2. Establish карданный a shaft as it is described in Head Kardannye shaft, in Razdele Kardannyj a shaft.