Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Steering
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
Engines
Fuel system
Ignition system
Start system
Release system
- Transmissions
   - Mechanical transmission (type 1)
      The system description
      Diagnostics
      - Service out of a workshop
         Oil for a transmission
         The gear change lever
         The illumination switch
         Back fixture of the engine
         Transmission removal
         Transmission installation
         The case-extension piece (for model with a drive on two wheels and engine G16 and J20)
         Oil epiploon of the case-extension piece (for model with a drive on two wheels and engine G16 and J20)
    Mechanical transmission (type 2)
    Automatic transmission (4 A/T)
Coupling
Transfer
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment





Transmission installation

For installation execute removal procedure in return sequence, paying attention to the following:

Observe values of the moment the inhalings resulted more low.
    The inhaling moment:
      (a): 85 Н•м (8.5 kg th, 61.5 pounds-foots)
      (b): 50 Н•м (5.0 kg th, 36.5 pounds-foots)

 PERFORMANCE ORDER

    Establish exhaust pipes №1 and №2 as it is described in the Head release System, in Section Components. Reliably establish each clip for wires, a hose and a cable. Reliably establish a clip for casings of the lever of switching. After installation of the working cylinder of coupling check up a free wheeling of a pedal of coupling as Coupling is described in the Head, in Section the Free wheeling of a pedal of coupling. Fill in in a transmission oil for a transmission as it is described in the given Chapter, in Section Oil for a transmission. Fill in in transfer oil for a transfer gear wheel as it is described in the Head Transfer, in Section Oil of a distributing box. Attach the battery and check up work of the engine, coupling and a transmission. Establish карданный a shaft as it is described in Head Kardannye shaft, in Razdele Kardannyj a shaft.










QX4.ONLINE
S40.ONLINE
A-8.ONLINE
W124.ONLINE
RX300.ONLINE
W140.ONLINE
B3-B4.SPACE
B3B4.SPACE
A-8.SPACE