Suzuka Grandee Vitara
The general information
Maintenance service and greasing
Heater, ventilation and the conditioner
Suspension bracket
Wheels and tyres
Forward приводной a shaft shaft/bearing. An oil epiploon
Kardannye shaft
Brake system
- Engines
    Mechanical part of engine G16
    Mechanical part of engine J20
   - Engine cooling
       The general description
       Maintenance service
      - Vehicle routine maintenance
         Plums of a cooling liquid
         Hoses or water pipes of system of cooling
         The thermostat
         Belt of the cooling fan
         The cooling fan and муфта the fan
         The water pump
         The gauge of temperature of a cooling liquid of the engine (EATS)
      Necessary service materials
      Technical characteristics of the rotating moment of an inhaling
Fuel system
Ignition system
Start system
Release system
Forward and back differentials
Windows, mirrors, locks and security measures. An immobilizer
Electric equipment

The cooling fan and муфта the fan



    Disconnect a negative cable (-) from the accumulator.
    Merge cooling system, having turned off a drain stopper (1) radiators.
    Disconnect an inlet hose of a radiator from a radiator. Turn off cooling fans/nuts муфты.
    Remove распорные bolts (1) tanks of liquid P/S from a radiator support (only for engines G16).
    Remove clips of a casing of a radiator. Then remove cooling fan/muftu and a radiator casing.


Check up hydrodynamic муфту about oil leak. If it is necessary, replace knot муфты the fan (2). Do not assort knot муфты.

1 — the cooling fan
2 — knot муфты the fan
3 — a bimetallic part


Establish the removed parts as it should be the return to dismantle procedure.


    Fill system of cooling with a corresponding cooling liquid, having addressed to Sections the Cooling liquid and Washing and filling of system of cooling in this Chapter. After installation check up each connection about a leaking.